[StephenM]

UmbralDragon and Stealthman…..your ideas and contributions are terrific! Thanks!

I’ll test-drive the two different SabreSkin diameters to enhance in a combination.

[StephenM]

With the coaching and coaxing of you, Stealthman, and Bruce G my own length has increased by an inch in less than 8 months, even without the extra exercises of which you are an expert advocate.
Thank you very, very much.

[StephenM]

Hello Stealthman and all,
The epoxy worked perfectly to affix the Sterling and Copper magnet ends to the nipple stub!!!
The MagVolts are sure fun!

Weekend washing of my old, old car (all steel) proved hilarious as my MagVolt locked my clothed crotch to the door and side panels in an unplanned buffing of the carnuba wax. Who knew MagVolts could help shine a car?

[StephenM]

Dear Christian,

You are the Adonis among all us short guys! Of course we admire you!!!!!!!!!!!!! Whether you got in those jelqing tugs or not, you tall, exercising guys have earned admiration… and not one moment of that admiration is “pervy.” 😉

Dear USMC 0313,
You sure are right…I like your comment about wanting to demonstrate a healthy endocrine system.

While I do not have the girth you enjoy, the length experienced from InnerWear and sleeves/Corkscrew/SabreSkin and MagVolt is a stabilized  1+ inch over the recent months.

In a locker room where the management of the gym/pool might not use the furnace to keep room temperatures up, there will be all sorts of Celsius/Fahrenheit reasons for retraction and tightening of our penises and scrotums– just to keep our sperm healthily warm.

For any of us swimmers the locker room shrinkage of penises is even more dramatic. Proper pool management needs to keep the water on the slightly chill side so swimmers stroke with less exhaustion and the pool disinfectants are conserved. After a vigorous swim in a pool where competitive swimmers train it might require a 20-minute HOT shower or some intentional jelqing to get our penises to relax.

Stealthman gave us a tip about using the Sabre Skin when swimming. That in addition to an after-swim hot shower may be the best relaxation.

Have fun, Gents!

[StephenM]

oHHHHHHHHHHH YOU TEMPT US SO!

Thank you for your hints, StealthMan!

[StephenM]

With my MagVolt back in its proper place and doing what its genius inventor intended I must encourage you guys to think creatively. I wonder … if I swallow a steel bolt … could the MagVolt pull it upward and out of my …. NO, I will not experiment with this one 🙂

 

[StephenM]

Stealth MagVolt to the Rescue!!!

The Saturday morning of chores started normally with shower, shave, donning Stealth and clothes. The priority of the morning was a car repair before volunteering to plant 230 trees for a nearby park.

The car needed a replacement part installed. The switch mechanism that runs the headlights and fog lights had begun to fail and turn on the fog lights when the car was shutoff. Hmmmm.

The part was ordered and arrived. The torque screwdrivers were readied and I dutifully watched the YouTube (the university of the known universe) for exact procedures.

All parts came apart perfectly and the re-assembly began after reconnecting the electrical couplings. When inserting a screw to tighten down the part, I fumbled and the screw slipped down…down…down into the cavernous cowling that houses the steering column and rearward of the steering wheel.

Exasperated at not being able to see the essential screw and not having an extra, I sat still and wondered how to disassemble the entire system to even see where the screw had lodged or perhaps rested. I pondered over what tools I might have to make the task easier and realized the screw was steel …. and the brilliant solution arose 🙂

In moments I unbuckled my belt, and slid my trousers and underwear down in order to fetch my MagVolt. In a very public parking lot where movers and residents wandered by regularly I am fortunate to not have been arrested for momentary “flashing nudity” to my neighbors 🙂

With MagVolt in hand and easing its length into the  cowling, nothing clicked to its powerful magnetic field. Using its end magnet to glide along the plastic shroud that hid the screw I hoped to attract the screw. Drawing the MagVolt along the plastic-like covering behind and below the steering wheel my eyes spied the screw appear from the darkness, obedient to the laws of magnetism, and arising to my grasp.

StealthMan can now add automotive repair to the many benefits of the MagVolt and having one handy and carried on the Handyman 🙂

[StephenM]

Dear Stealth Man,

Thank you for your wise advice. I’ll implement immediately.

[StephenM]

Hi Teckon,

The Corkscrew arrives with completely malleable girth so the diameter around our penis shafts is completely adjustable.

The Corkscrew arrives extra long so the extra coils that can be trimmed off so the Corkscrew can be slid over the entire penis (when wearing the Stealth Innerwear, the Corkscrew surrounds the entire penis shaft) with the Corkscrew base pressed against your pubic bone and the top of the scrotum.

The two to three coils of the Corkscrew at the distant end are pressed/squeezed into tighter coils that are narrow enough to hold behind the head of our penises (when foreskin, if you have any, is gently retracted) so the entire Corkscrew can be stretched longer and even curved downward by stretching the adjustable coils.

The base of the Corkscrew pressed against your pubic bone  — and the distant end of the Corkscrew snugly anchored against the head of our penises creates a tension that holds our penises in a position that can be gently stretched (not to over do this) and even curved downward if you want to wear the Corkscrew under clothing and not have you penis projecting like a rocket in a forward trajectory.

NOTE: The Corkscrew’s original length is designed to be extra long when it arrives. Put on the Stealth Innerwear and then place the Corkscrew base against your pubic bone and surrounding your penis, If the head of your penis is not exposed out the distant end of the Corkscrew, then trim off 1/2 or more of the base coils with a pliers or wire/cable clipper.

Cover the cut end with the pliable end-cover provided with the Corkscrew.

With the cut metal end properly covered, test again to see if the trimmed away coil created a Corkscrew length where your penis head can be secured  by the last two to three coils made narrower by your pressure adjusting the diameter to snugly fit behind the groove behind the penis head (the sulcus).

When my Corkscrew arrived, I cut away small increments of the coil so as to arrive at the proper length.

[StephenM]

The Sabre Skinâ„¢ is a fantastic feeling when worn over the Stealth Innerwear which wicks away moisture and allows great circulation.

The Sabre Skinâ„¢ gently compresses the entire length of my penis and maintains the gentle stretch of the shaft to its customized length. What words even begin to describe the sensations? Comforted. Invigorated. Fervid. Roused. Extended. Alert. Spirited.

Since the Sabre Skin™ arrives in an 8” length we cut to the proper length for use with the Innerwear, is there anything  harmful about using that remainder of the Sabre Skin™ to only wear directly against the skin – if we keep from excess moisture buildup and realize the TPE will conform somewhat to our actual penis girth instead of the wider Innerwear?

Would you advise wearing the Sabre Skinâ„¢ and Innerwear when swimming in chlorinated pools? I suspect the chlorine will weaken the Innerwear for a shorter lifespan like it does for nearly all fabrics? Of course, this means a perfectly dry Stealth Innerwear would be worn after the swimming session while the wet Innerwear can air-dry.

Will swimming in chlorinated pools harm the qualities and lifespan of Sabre Skinâ„¢?

What are the “proper care and feeding” instructions for the Sabre Skin™? Is it okay to use simple gentle soaps to wash by hand?

Is Sabre Skinâ„¢ harmed by contact with water-based or silicone-based sensual lubricants?

Sunrise of Sunday is beginning here, as is the time for gardening chores before church. I’ll do my best to keep my steel pruning shears far away from my Mag-Volt. ?

 

[StephenM]

Dear Stealthman and Stealth Test Team-members,
Though you do not have the salary or ticker-tape parades of an Astronaut, you advance our understanding and pleasures of the inner worlds. Thank you, StealthMan for all you do!

I stand with UmbralDragon in celebrating your inventiveness and hope the restaurant pinch was not too high a price to pay for the insights you immediately incorporated in the Mag-Volt! — for all our sakes!

Frankly, the occasional and abrupt locking onto a metal might only be socially embarrassing if dancing with another chap also wearing a Mag-Volt OR a woman wearing a steel chastity belt. Since chastity belts of steel are very rare these days, the only special alert ought to go to our gay brothers who may have the happiest fun with such magnetic docking.

Motorcycle riders may create a whole new meaning to crotch-rocket (smiling) but will have no social price to pay by being discovered lightly stuck to their fuel tank (chuckling at the situation).

I can’t even imagine the scene if an iron ore miner from Guongdong, Pilbara, or northern Minnesota becomes one of our Stealth For Men compatriots with his Mag-Volt worn at work. (He’ll have some stories for us – chuckling more).
The current power of the Mag-Volt is excellent, and I heartily appreciate the forceful clasping the opposite poles of the set has. The non-magnetic spacers are brilliant, and the interspersed magnetic tubes are perfect.

Even after tithing and gift-giving to neighbors and family, I acted with gluttony, by buying two Mag-Volts. In my silly head I mused my excessiveness was to test if any noticeable difference could be felt between the copper and silver plating. Since both elemental metals are fantastic conductors of electrical current and do not hinder the magnetic core wrapped with them, I guessed both would feel the same… but just wanted to test the guess. Indeed, they are both fantastic experiences.

Here is some trivia……
Did you know that if properly measured, the distance around our penises and scrotums is nearly always the same as for our wrists? Perhaps the wrists of rock-climbers and manual cow-milkers are bigger, but usually a perfect cock-ring is also a perfect fit for a wrist. Two of the Mag-Volts clasped together is usually a perfect and snug fit around the neck. Unless my neck is bigger than usual male proportions because of occupational or sport exercises, a neck band is roughly the same as two cock-rings linked together.

Now, this may all seem utterly silly until you realize wearing your Mag-Volt on your wrist might just be the most convenient carrying place between Mag-Volt wearing sessions (if you ever do take a break).

These are just some goofy thoughts that might stimulate creative fun among any among us.

Cheers our Astronaut and to you each and all!
Stephen

[StephenM]

A funny thing happened in my Mag-Volt-wearing day,

Mid-presentation of the John Maxwell’s six leadership principles with managers we have a segment of the seminar where I carry around to each participant a deck of cards that are used to clarify what are their most important human values.

I reached for the steel mesh basket in which the decks are stored and began walking around the massive mahogany conference table when a distinct “clink” of magnet to metal caught my ears and latched onto the mesh basket with my crotch securely bonded to the steel.

Perhaps no one else noticed…perhaps. Yet, in the ensuing moments while verbally enumerating the steps of their exercise clarifying their most important values, I was trying my best to discreetly unfasten my business suit trousers from a steel mesh basket.

Over the weekend, one of my home chores was to checks fluids in the car, a 1984 Mercedes diesel sedan. Since I’m rather short compared to you fellows, the fluid checks and refills required leaning over the large engine. You can guess….the steel car glommed onto my crotch like Gorilla glue with a resounding “CLICK!” through my Levis.

My Mag-Volt has me highly charged and keenly attentive to what surfaces are near my encircled penis.

Can you imagine what will happen when my 95 cubic inch steel scuba tank needs hauling down a ravine to the river? Scuba tanks are nothing more than giant bells. They ring loudly and clearly as many church bells cast from bronze.

Fun adventures are ahead.

[StephenM]

These are great stories, you guys!

Thank you for sharing your experiences.

Stephen

[StephenM]

Dear Ian,
As Mae West wittily stated, “It is better to be looked over than to be overlooked.”

She also advised, “I’ll try anything once, twice if I like it, three times to make sure.”

The curve of the Corkscrew is demanding some special clothing adjustments for me as well. It is a fun process.

[StephenM]

Hi Ian5009!

The forward protrusion of me wearing the Stealth InnerWear with the Corkscrew or without the Corkscrew is well managed by wearing a jockstrap or some thongs as the pouch can be centered in business suit pants or casuals.

Ian, do you carefully bend and stretch the Corkscrew when you are using it?

When I read the advice of StealthMan, I tried some modifications to the layers of the Stealth Innerwear and the Corkscrew angle. Here is how…
1. Morning shower
2. Put on the Stealth InnerWear [sometimes with a layer or two of the thin Lycra sheath(s) and sometimes with thicker Premium Sheath(s) and sometimes with a combination of sheaths and stretchbands he provides, and sometimes without any sheath or bands — if I am going to wear the Corkscrew]
3. Remove the Corkscrew from its shaping tube, slide the Corkscrew onto my penis …
4.  …and  carefully resize the two to three rings of the Corkscrew that are nearest the tip on my penis so they “snug”  firmly around and behind the silicone ring embedded in the end of the Innerwear sheath. [That means the Corkscrew rings are snugged around the distant end of my penis shaft and seated behind the glans (or head) of my penis — which is behind the silicone ring of the Innerwear.]
NOTE: Adjusting the snugness of the two to three rings of the Corkscrew may require several test drives to get the snugness just right instead of too loose or too tight
5. Once the Corkscrew is snug enough to hold the head of my penis and the Innerwear silicone ring, I stretch the Corkscrew backwards to seat against my pubic bone [atop my penis shaft] and against the skin where the scrotum and penis shaft meet on the underside.
6. Stretching the coils of the Corkscrew to the correct tension is a variable stretch that Christian taught me to go slow and not be too vigorous (I’m smiling and grateful about his wise counsel).
7. When stretching the Corkscrew away from my body, I then carefully bend the metal coils downward — which makes the Corkscrew a little bit less conspicuous under clothes.
8. I put on a McKillop’s T-Bar jock and get to work or play in the big wide world.

[Author]

Posts