StephenM

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 65 total)
  • Author
    Posts link
  • in reply to: problems installing and wearing View Full Thread

    StephenM
    Participant

    Thinking of Dusty Peaks’ discoveries and the arrival of my latest purchase of new InnerWear, I am grateful as always for your solid advice and patient coaching. The new InnerWear fits flawlessly, I am thankful to report. Currently I “suit-up” after morning showering and then drying with special attention to towel-drying the glans and frenulum.
    1.)  If dry, the reaching through the silicone ring of the InnerWear and beyond the fabric base allows me to grasp the glans firmly (without slippage) and hold that grasp as I pull my penis through the InnerWear’s woven sleeve until the silicone ring sits exactly at the sulcus (the groove of the shaft below the glans and coronal rim.
    2.) Then I open the SabreSkin wide enough to place its leading edge exactly even with the InnerWear’s silicone ring. The thermal properties of the SabreSkin respond after I unroll the entire length of the skin on top of the InnerWear to rest exactly at the base of the InnerWear shaft. The InnwerWear is then completely within a perfectly fitted SabreSkin tube that conformes to my penis by the thermoplastic properties designed into it.

    3.) To prevent turtling when sitting or crouching (when high pressures are put upon the silicone against the sulcus and corona), I add a retention band or two to firmly seat the SabreSkin and silicone ring against my penis shaft and not slipping out of the sulcus and over the coronal edge.

    Christian has taught me to randomly use massage of the entire shaft and head (like rolling out potter’s clay) to stimulate great circulation. IT FEELS great, too!

    The new InnerWear is terrific. I must remember to re-order after so many washings so the integrity of the fabric and silicone are at their best. Thank you for making a meticulous product.

    Stephen

    in reply to: Erection Size? View Full Thread

    StephenM
    Participant

    Dear Stealth Man,
    Geeeesh you are a wealth of careful consideration and integrity.
    Thank you for your illumination of the contrasted techniques and the physiology and physics involved.

    Stephen

    in reply to: Erection Size? View Full Thread

    StephenM
    Participant

    Dear Christian,
    Seeing the smiling photo of you and your beloved wife is heartwarming. Thank you always for your insight and cheering us onward with patience. You are a giant among men in several ways <grinning> meaningful ways.
    Yours as ever,
    Stephen

    in reply to: Erection Size? View Full Thread

    StephenM
    Participant

    Dear Michael,
    Your assumptions are reasonable and the anecdotal experience and measurements I’ve enjoyed with the entire Stealth system. Within 24 months I have seen 4 sizes increase in length and 3 sizes increase in girth and
    While others among the end-users also incorporate penis enlargement exercises and a vigorous massaging technique referred to as Jelquing, I focus on pharmaceutical grade natural nutrients, specialized l-Arginine formulations suitably cleared by the International Olympic Anti-Doping that cross the blood-brain barrier to cascade numerous wellness benefits. Combined with deliberately healthy activities and zero drug or alcohol, my internal laboratory experiment is resulting in fine outcomes.

    in reply to: Vac Hanger View Full Thread

    StephenM
    Participant

    Be safe, StealthMan.
    The key to personal care seems to be washing hands to eliminate any virus picked up by touching surfaces or people infected… and to never touch eyes, nose, mouth or face without washing 20 seconds in soapy water.

    While it may seem the infections are high in other countries like the USA, we may never actually know the true numbers of China’s infections and deaths for a factual comparison.

    Just a suggestion, minimize “news” broadcasts owned by entertainment parent companies to once a week, if the noise and weak science reporting results in inner anxiety.

    With warmest wishes for your wellness and return to creative work as soon as it is appropriate.

    in reply to: Some issues View Full Thread

    StephenM
    Participant

    Dear Stealthman,
    Hearing of your relative safety in Canada is very good news. The projects will be far better when you are at your peak after the healing arts practice in India.

    With warmest wishes,

    Stephen

    in reply to: Some issues View Full Thread

    StephenM
    Participant

    Dear StealthMan,

    Thank you for your note and re-nurturing your life in the well-springs if India. May every fulfillment be yours!
    Sat Naam

    Stephen

    p.s. Please stay safe from the chaos and risks related to the coronavirus. We will live just fine without you being endangered or in the turmoil. Your latest invention and product launch will thrill us, just as your previous gems, but far better if you and your team are safe.

    in reply to: Corkscrew View Full Thread

    StephenM
    Participant

    If it is of any assist….These are steps I used to carefully and progressively remove part of the extra length of the Corkscrew when it was newly arrived.

    StealthMan and Bruce G likely have better descriptions and very wise suggestions for your fun and well-being.

    Determining how many coils to cut, if any, was done in this manner with my first Corkscrew:
    1.) If you are intact with a foreskin on your penis, fully retract your foreskin, if that is possible.

    2.) Put on the Stealth InnerWear and at least one of the Retainer Bands around your penis and just behind the embedded silicone ring of the InnerWear sheath. The Retainer Band will keep the head of your penis from retracting inside the InnerWear and allow you to measure the right length of the Corkscrew before cutting off coils from the end of the Corkscrew nearest your penis’ base of the shaft that meets the pubic hair and pubic bone and touches the top of the scrotum underneath your penis shaft.

    3.) Remove the Corkscrew from the bag and the plastic pipe used for storage and re-shaping of the Corkscrew. When it is new, both ends of the Corkscrew coils are tapered. The front-end of the Corkscrew will be the end that you do NOT cut, as its narrower tip will be useful as you squeeze the first three coils even narrower to fit snugly around your penis’ girth and replacing any Retainer Band — the squeezed Corkscrew coils will press entirely around the InnerWear’s silicone ring to anchor behind your penis head and holds the corona of the glans (the rim of the mushroom-like head).

    4.) Hold the Corkscrew and slightly un-twist the coils evenly so the inner core opens wider but the coils remain together along its length. This makes a wider “pipe” of coils that will fit around your whole penis shaft clothed in the InnerWear.

    5.) Slide the Corkscrew onto your penis and press it into and against the pubic bone and scrotum, so you can pull the head of your penis and the neck of the InnerWear beyond the length of the Corkscrew. (with the Corkscrew surrounding your penis shaft and pressed against your body, you will see if the Corkscrew is too many coils in length to allow you to pull your penis head and InnerWear ring beyond the tightly wound coils of the Corkscrew.)

    6.) IF and only if … the Corkscrew (tightly coiled) is too long of a tube to allow you to pull your penis head and InnerWear through the end, then incrementally, you will cut away the back-end coil — removing 1.5 centimeters or 1/2 inch in each cut before testing the fit again.

    7.) When enough of the back coil is removed, use the vinyl cap supplied with your Corkscrew to cover the freshly cut end. This will protect you.

    8.) Then, get into the the entire assembly of InnerWear with the properly sized Corkscrew, and pull your penis through the amply wide Corkscrew. When the head and InnerWear silicone ring are exposed, squeeze or massage the final three coils of the Corkscrew to be narrower and narrower in girth so they securely anchor behind your penis head and silicone ring —- this is subtle as you do not want blood flow to be hindered, but do want snugness enough to prevent the Corkscrew from coming off until desired.

    9.) Once the front end coils are adjusted snugly, you can extend the Corkscrew by making space between the coils of the back section closer to your body and scrotum. This is what GENTLY stretches the penis and also allows you to curve or bend the Corkscrew’s entire length so your trousers, shorts or swimwear do not look like a SpaceX rocket is about to be launched…. unless that is exactly the sort of theater you want to create.

    in reply to: Confidence is great View Full Thread

    StephenM
    Participant

    Christian, you have some priceless stories i always enjoy re-reading.

    With your astute guidance and collaborations with Stealthman and Bruce G, even i am getting a stare of astonishment. (Grinning in appreciation)

    in reply to: Corkscrew View Full Thread

    StephenM
    Participant

    To cut coils from the Corkscrew so the extra length is trimmed away, i used a wire-cutter on one corkscrew….perfectly capped the end with the vinyl cap provided……and used a pair of scissors ( made for emergency medical extraction of a person in motorcycle leathers and to prep bandages). This worked perfectly as well.

    in reply to: Corkscrew View Full Thread

    StephenM
    Participant

    Hi TK..

    When my corkscrew arrived, I bungled about and finally asked Bruce and Stealthman for advice. They really guided me well.

    First, I put on the Stealth InnerWear. (Mine has the cockring and sheath as it just feels better for me than the sheath-only version — personal preference.) I use one or two of the wide rubbery Retainer Band that Stealth provides to keep the InnerWear sheath’s silicone ring in place behind the head or glans of my penis. The Retainer Band will eventually be removed as I slip the Corkscrew (with the width opened wider) onto the shaft of the penis and then the width of the most distant Corkscrew rings are adjusted tighter (narrower girth) around the penis shaft directly behind the head (glans) so the stretching of the Corkscrew will push gently in two directions: toward the body and toward the glans.

    Second, I open the Corkscrew bag and am certain to keep the soft, vinyl cap that will protect the end of the Corkscrew after you cut off a coil or two of the Corkscrew so it is the best length.
    A new Corkscrew is purposely made too long of my penis. So, I opened up the girth of the Corkscrew and slid it onto my penis and InnerWear and measured how many coils were extra before cutting the Corkscrew and using the soft, vinyl cap to cover the newly cut end and protect me from the rough end. I squeezed the Corkscrew coils to be narrowed behind the InnerWear’s silicone ring. Experiment with how snug is good for your circulation and for keeping the entire gear working.

    The remainder of the Corkscrew coils are snug up the shaft to press against the pubic bone and the top of the scrotum (sack).
    I make the last three coils of the distant end of the Corkscrew narrow enough to be snug around the penis for blood flow and secure behind the silicone ring of the InnerWear — so that the head of my penis does not retract and the stretching of the upper coils creates that gently stretch of the penis. I also bend the entire Corkscrew in a slight curve downward so the bulge is more subtle under my trousers, shorts, or kilt.

    Because the Corkscrew is heavy (by design) I also fashioned a “waistband” that loops over the coil of the Corkscrew nearest to the pubic bone and around my waist (using a long shoe lace or boot lace) that can be secured by tying or a cord lock similar to those used by backpack makers. This “waistband” helps secure the Corkscrew in place during my active home-life doing chores, gardening, hiking etc. When I first used the Corkscrew and was walking to the postal box at 5 AM on a balmy morning, the Corkscrew was not quite snug enough behind my penis glans to stay put—- and raced with gravity down my pants leg toward the pavement. If the hour had been later and neighbors were about, I’d have some interesting stories circulated about me and the strange contraption that fell out of my pants or boot.

    Hopefully these notes assist your enjoyment of the Corkscrew.

     

    in reply to: Vac Hanger View Full Thread

    StephenM
    Participant

    Dear Stealth Man,
    You are creating the best. We can exercise patience and gratitude.

    Wishing you well in your journey and wellness for all those in China.
    Stephen

    in reply to: Who here has done hanging before? View Full Thread

    StephenM
    Participant

    You and your team have never disappointed me.
    Since being introduced to your product line I have a penis growing three sizes in length and four sizes in girth (modest, but meaningful) with less retraction into the foreskin, shaft, and body (“turtling”). You and Bruce G and Anamika G each offered the kindest advice, encouragement and insights.

    The Innerwear. Sleeves, Platinum Sleeves, Corkscrew, Sabre Skin and MagVolts have all been delightful experiences and sensations I would not have imagined or invented myself. Thank you!!! Though I mis-measured my penis at first, your careful and patient help got me to the correct fit and pleasures that come along with Stealth for Men.

    Though totally new to the idea of Vac-Hanging, I will likely give it a try, simply because of the trust I have of you and your team, as well as the regard I hold for what our forum members have expressed with great wit and important intimacy.

    This forum does inspire me with creative “wearing ideas” presented by you and our members. When you started the topic thread about funny things that happen to us when wearing Stealth for Men, I enjoyed the tales our fellows and their sweethearts described.

    As I am aging toward retirement after a very fortunate life of athletic health and inner wellness, I suspect some changes will inevitably occur that alter my sensual and sexual experiences. Sharing in this with you all has been an interesting and positive process.

    in reply to: Who here has done hanging before? View Full Thread

    StephenM
    Participant

    In the recent responses, your stories of vac-hanging experiences remind me of how grateful I am to those in the front lines of your research and development. Thank you to the Stealth for Men Team!!!!

    in reply to: Innerwear moves up at the base View Full Thread

    StephenM
    Participant

    Dear Stealth Man and Team,
    After many months of wearing Stealth inner wear, spandex sheaths, neoprene platinum sheaths, corkscrew, MagVolt and SabreSkin in daily variations, I am unreservedly grateful to you for the innovations and customer care.

    Though my test-drives in various sizes required a bit of size changes, every experiment was fascinating and lesson in anatomy and engineering as well as uncovering new pleasures.

    Of course the greatest praises go equally to Bruce, Stealth Man and Christian for guiding and knowing so very much more than I could guess. Others among our troop of wearers selflessly gave of their insight. Thank you, guys.

    Just now arriving home after a 15-hour workday, I stripped away business attire and smiled at the sensations of the InnerWear + SabreSkin + MagVolt combination I assembled to wear many hours earlier.

    Thank you for being a perky part of my day.

    Stephen

Viewing 15 posts - 1 through 15 (of 65 total)
Only users that have purchased Stealth products can participate in the forums.

Latest Topics