[Stealth Man]

I think you hit the nail on the head “when i am in the mood”. I don’t wear the buttons snapped up on the ball band myself but I do wear one or the other or even both the spandex sleeves layered over top of the innerwear ,with or without the Retainer Band… depending on my mood and expected social setting.

[Stealth Man]

Hi Fishdogcat…

Yes without the ball band to lift the genital mass forward and up there will be less bulge.

[Stealth Man]

The silicone ring already helps to create the illusion of a more pronounced coronal ridge. You can also use the spandex sleeves to further accentuate the look with some creative folding patterns. To cast a higher silicone ridge will not work the same for everyone. With 99 sizes that would effectively double the number of sizes to stock and choose from so it is maybe not so practical to implement. Another alternative is the soft silicone sleeves that we have been experimenting with. These can be worn over the Innerwear instead of the spandex sleeves and positioned in such a way to create the pronounced coronal ridge you are after. These will be available as an accessory in the future as they can be used by themselves under swimming trunks for water related activities.

[Stealth Man]

Agree that you need to have some time and space to get familiar with the proper use of the Corkscrew.

Do not wear the Corkscrew thru TSA or you will be pulled aside and searched for carrying a large metallic device in your pants.

The Corkscrews are made for maximum weight at a given size. However if you prefer a smaller lighter device it also includes a PVC end cap for sealing the wire after removing coils.

I personally prefer a lighter Corkscrew with 2 coils removed for the overall comfort and convenience that it offers over the weight of the full size unit. Worn this way the coils can be spread apart for the mechanical forces of extension to be applied.

You should not take this suggestion as an insult but rather an opportunity to experiment and find ways to get the best performance out of the device.

 

• This reply was modified 7 years, 1 month ago by Stealth Man.

[Stealth Man]

I think a woman’s first reaction often is who are you trying to get into bed with automatically associating the product with the need to attract a sexual partner.

Depending on the type of relationship you have with your spouse would determine where it goes from there but I think a bit of honest communication about the enhanced sense of confidence you experience would be not hard to understand or at least appreciate.

Men are so caught up in their dicks to the point of major impact on identity and sense of masculinity.. no doubt some more than others.

Then there is the whole penis enlargement story which may or may not factor into the equation. Some women may even get turned on with the idea as Christian relates while other may just shake their head in bewilderment.

I guess it depends on how stealth you want it to be and whether you feel your spouse can relate or not.

keep us posted on how the story unfolds!

[Stealth Man]

Christian,

Sorry to say that we don’t have any more video uploaded as of yet.

The only real challenge that would prevent progression on the learning curve to mastering the use of the Corkscrew would be if the coils are simply too long to secure behind the glans or too tight to thread onto the shaft.

To make the Corkscrew wider in diameter you can simply unscrew the coils to open them up to the required girth. For length you can use a box cutter to remove coils one at a time to determine your preferred length. You can use the PVC end cap that is included in the kit to seal the wire.

Once you have the coil properly prepared it is relatively easy to put on and wear.

As seen in the demo clip… put one of the spandex sleeves halfway on the penis leaving the other end hanging off so that it can be used to thread the coil into place at the base of the penis. Then tighten the last two coils a bit with a screwing motion to semi secure in place and then remove the sleeve. You can fine tune the intensity of the coils grip behind the glans by tightening more. Finally you can adjust the tension of the coils along the entire shaft to more evenly distribute the load.

To remove simply loosen the coils and slide the coil off. You can reform the distorted Corkscrew after use on the reforming tube by screwing both ends at the same time with a compressing action in opposite directions to align the coils for the next Corkscrew session.

Its fairly straightforward so I suspect the Corkscrew might be too long which would definitely make it more challenging to put on. If you cannot pull the glans thru the coils you need to cut coils off one at a time until you can easily secure the last coil in place behind the glans. Don’t be afraid to go a couple of coils shorter and then spread the coils apart to extend the penis. This will make for a lighter Corkscrew that is easier to get on and conceal beneath clothing as well.

As mentioned there is a learning curve involved so make sure you experiment and develop the skill to make use of this device.

If you have any further questions I will be happy to offer more specific suggestions.

[Stealth Man]

dickdc,

The Corkscrew is going to add quite a bit of bulk no doubt. Its not really a bulge enhancer in that sense but rather a more serious PE tool for lengthening the penis.

The only way to deal with it is the style and combination of clothing. I personally like wear the Corkscrew down the leg thru the underwear opening. The profile is slimmer this way rather than compacting the mass in any way for a bigger bulge. As I am looking for maximum stretch I don’t want to limit the extension as well.

I wear jeans and untucked button down shirt to fully conceal so I don’t have any problems whatsoever in that regard.

Best to experiment with different clothing combinations and drape with long shirts if you want full coverage.

[Stealth Man]

Pedro,

You can definitely sleep while wearing your Innerwear with no problem.

However you will need to test and see whether you can comfortably wear the spandex sleeves and/or Retainer Band layered on top. If you combine all of the accessories it can construct the erection to the extent that it must be removed to resume sleeping.

If your Innerwear is brand new that also could be a factor so give it a week or so to properly break-in to fit before coming to a conclusion.

If you have already eliminated these likely causes then you can be sure that you are wearing a size too small in girth.

I am interested to hear your reply.

 

 

 

 

 

[Stealth Man]

Welcome aboard Estranger… just starting out so feel free make things happen!

[Stealth Man]

Christopher,

The Corkscrews are all sized to match the Inner wear. As we have 99 sizes of Innerwear we also have 99 sizes of Corkscrew.

The Corkscrew actually has more latitude for sizing that the Innerwear. For a smaller lighter version that is easier to put on and conceal under clothing you can shorten it by cutting off one coil at a time with a box cutter till you find your preferred size. The kit comes with a PVC end cap to seal the wire.

I personally prefer mine two coils less than full size.

Of course the girth itself is easily adjusted by screwing or unscrewing the coils. If the size is very far off you can use a suitably sized cylinder to act as the forming tube.

You should have no problem to get a good fit with what you have now.

Let me know if you need any further assistance.

[Stealth Man]

Christopher,

The Retainer Band is designed to be work over top of the Innerwear sheath. If you find it to be too loose you can wear the spandex sleeves underneath as well. There is also plenty of room for customizing the fit using the accessories. For example you can put as many layers of spandex sleeve as you like 2, 3 or even 4 1cm layers at the base to create a tighter fitting Retainer Band. If that doesn’t suit you let us know at the support email to see about getting a proper fitting RB.

[Stealth Man]

I can’t say about the ball stretcher but if you find the base band is more of a problem than a benefit then we can make you the Extension Sleeve which is the straight sheath version of Stealth… with no ball band.

[Stealth Man]

Masao,

As mentioned above the Extension Sleeve (ES) is the sheath only version of the Innerwear. The base band on the regular Stealth is 2 cm so the ES gets the extra sheath length so that the overall sizing remains the same.

Sounds like the ES would be more suitable for your anatomy. Although it is made to order and requires more time the cost remains the same.

Regarding price… first and foremost we will always deliver good value.

all the best to you!

[Stealth Man]

@disclaimer29

The urination technique needs to be adjusted to avoid any leakage from happening afterwards. The key is to relax and contract the PC muscle 2-3 more times than usual to completely drain the pipes. You don’t want to make the mistake of being in a rush and assuming everything is done only to realize later… it wasn’t. Another tip is to remove the Retainer Band to piss and then put it back (at the base) when finished. This will effectively act as a “stop cock” to prevent any leakage after the fact.

Also when new the fit will be tighter and urination more challenging. During the first week or so the sleeves might make it too tight for successful elimination. Once the materials break-in for a more relaxed and comfortable fit then one or the other spandex sleeves can be worn until broken-in and then both at the same time if that better suits the purpose on a given day.

[Stealth Man]

The unfolded base band makes the innerwear considerably longer which also contributes to the problem

[Author]

Posts