[Stealth Man]

Two Mag-Volts can be attached side by side for a double width and worn together to good effect… practically the same as the ball band on the Innerwear.

Sounds like you need to shorten the silicone tube to get a tighter more secure fit.

Here is the link to the silicone tube replacement that will give you a clear idea how to shorten the Mag-Volt without removing the beads.

The audio quality is not so great so I am going to see if I can’t make it better… if so I will have a new link for the updated video.

 

[Stealth Man]

Sounds like the size is very close. For me, when developing the sizing system, the acid test for fit was to sleep with the Innerwear on overnight and if woken up due to the discomfort of nocturnal erections then a size up in girth to resolve the problem. This would be assuming that you have given it 10 days or so to completely break-in for a comfortable fit. You can send me a message on the support email at [email protected] so I can access your purchase date and size to know more about what the circumstances are in your case.

[Stealth Man]

yes, I am also looking forward to switch on the idle projects. However, doesn’t look like this damn covid is about to give up the fight any time soon. We are starting on the Vac-Hanger now to see how much progress we can make in the mean time. For the Mag-Volt, there are some challenges to overcome which I need to be there in person to work on… so let’s see. Definitely the new Mag-Volt will be much better than the original, which btw, is still available on request for $30. The new one will be $65… so that is an option if you don’t want to wait.

[Stealth Man]

Still waiting for the travel restrictions to be lifted before getting back to work on this. Yes, a seamless rubber cap will be bonded to one of the clasping magnets which will be longer so that once the two are clasped together as one… the rubber end cap will be centred in the middle for a symmetrical and balanced appearance.

Better to replace the clasping magnets on the older version, however, the new Mag-Volt will have some other significant improvements that would justify simply purchasing the new one.

Cant wait to get back to the factory and resume work on the various projects waiting for completion.

[Stealth Man]

Compression hangers do not suit my temperament. However, I am aware that there are committed practitioners in both camps. I do feel that a shorter 15 minute high intensity clamping session before starting a longer lower intensity vacuum hanging  session would maximize the advantages while minimizing the drawbacks of both at the same time. In which case, we will be considering an advanced compression hanger design as well after the Vac-Hanger is launched.

I have not really looked into a jelq device, but certainly the cost of LG Hanger’s is absolutely ridiculous… as are the rest of their over priced products.

• This reply was modified 4 years, 1 month ago by Stealth Man.

[Stealth Man]

The Vac-Hanger is ready to go into production. The only hold-up is the current travel restrictions. Once I am able to be at the factory to handle things personally it will be a few months to complete the kit and then to ship and stock the shelves before the pre-launch to the SFM list members. There is no comparison to any of the brands that you have mentioned. Stealth sets a whole new standard for this category of device. This is not an opinion… it is a simple fact. You can sign up for the newsletter to get early launch notification.

[Stealth Man]

Yes, I am anticipating the travel restrictions to lift. They are allowing some types of visa to return already so I assume that business visa’s will be next. I feel something is developing… so let’s see.

[Stealth Man]

Ian,

You can send u a message at the support email [email protected] where we have the purchase history and resource material to help determine the correct size. We will send you a replacement in the size of your choice at  minimum expense to cover the basic costs involved.

[Stealth Man]

When you reply there should be a menu bar above the entry field. On the far right side you can see the mountain with sun icon. Press and that should give you prompts for uploading images from your ”source” which is this case would be your image library.

Hope that helps.

[Stealth Man]

Hi Switch, I mentioned a bit about the Vac-Hanger on your intro post in the other thread. Once the Vac-Hanger is launched it will, without a doubt, establish Stealth as the cutting edge company for the development of most advanced product designs. I can’t wait to reveal it to our members here. For now we sit back and wait for the rona to subside. Interesting times to say the least. This too shall pass and we move on to better things in general.

cheers!

[Stealth Man]

Hey Switch… welcome!

The Stealth Vac-Hanger is the most advanced design and versatile device in its category by a long stretch ;). Once you see the actual device you will know instantly what I mean. Unfortunately, we are unable to release any pics at this point as the novelty of the device will lost if exposed to the public domain and our patent applications rejected. We are currently waiting for the travel ban to be lifted so I can get back to the factory to handle the production and final details of the kit assembly in person.

All the best!

[Stealth Man]

thanks for the feedback and clearly detailed the procedure for wearing. I might add that you definitely want to make sure that you are dry after showering before pulling the glans thru the sleeve. It can be a bit painful if any residual moisture is still on the skin… in which case some baby powder works very well to help slide thru the sleeve more easily.

cheers!

[Stealth Man]

Hi Switch,

Welcome to the forums.

The Vac-Hanger will be more specific to hanging heavier weight but also having the option to wear with lighter traction for extended periods of time like the PF. The kit quality overall will be on par but of a far superior design. I would definitely wait but if you don’t mind spending more money to get what will become your primary device then it wouldn’t matter if you purchase now what you will not use later. Currently, we are being held up due to the travel restrictions preventing access to the factory so that I can handle the final production and kit assembly myself in person.

[Stealth Man]

Good to hear DP.

Yes, the apex of the coronal ridge is the leading point of resistance against the silicone ring which kinks the glans once the two sides come into contact with the ring. This becomes more of a factor with a longer than optimum sleeve particularly when bending over and sitting. The solution would be a contoured silicone ring, however, this forms a “tab” on the underside of the glans which invites pulling and leads to failure of the silicone to fabric bond. Actually, we had to weigh and balance so many factors when designing the product to resolve the functional considerations with the manufacturing limitations. Too far one way or the other and a new set of problems come into play.

[Stealth Man]

You can send a message at the support email [email protected] for help on sizing as the order history with sizes is available. The resizing process might be a bit too personal to detail back and forth here as well.

[Author]

Posts