[Stealth Man]

Hello Bigjuan,

Thanks for your continued interest and patience.

We are currently working on the motion graphics animation clip to show-case the product. Meanwhile, we are also working on the box packaging with foam insert to hold the components in place. As we have all twelve girths that are standard for Stealth with three sizes for each kit… it is a complex task with high MOQ’s. We are also including a glans protection cap for each of the sixteen total sizes that we will have available in the series. Size 24 has been tested and approved so now the balance of molds for the remaining fifteen sizes are undergoing manufacture. The order for the packing tubes been placed and once these are in hand we can start the production of the TPE components for safe storage directly out of the mold on production. All the other components are on in hand for the completion of the kit. This would include the pump, gauge, scale, vacuum tube with custom adaptors, the valve assemblies, three different tapes, carabiners, belts, etc. We will also be including a cord and pulley system in the kit, so we are putting that together as well. The last thing will be the submission of the patent application before we are in a position to release the details of the kit in preparation for the launch date.

I project of this magnitude and complexity take time. So again, I appreciate your continued interest and patience!

[Stealth Man]

Hi Blikner,

The Innerwear fit when brand new can be on the snug side. This will loosen up for a more comfortable fit over the first week or so of use. You can then start to experiment with the sleeves layered over top. However, if the fit is obviously too tight you might want to consider a resize.

The Innerwear purchase comes with a single Retainer Band. If you ordered an individual set of Retainer Bands, then yes, you should have got to in the package.

 

[Stealth Man]

Hi Stephen,

Sorry for the delayed response, I somehow missed this post.

Most Excellent! It’s always great to hear about gains.

We recently received a private note from a regular customer who reported significant gains that were documented thru his transition up in size thru subsequent orders.

Congrats!

[Stealth Man]

The answer to this question is almost as varied as the individuals who ask it. Everyone responds differently with numerous contributing factors such as body type, age, diet, smoking and drinking habits, consistency and mental attitude to name a few. No matter, you will see some results right away, however, these are only temporary so you will need consistent practice over time to realize stable gains.

Keep in mind that the Innerwear is a passive extender, so it is highly recommended to engage in a number of methods and techniques that would include at least some manual jelqs and stretches. The Corkscrew would be a good addition to your training routine as well as some other higher intensity short-duration exercises such as hanging to induce a state of deformation to initiate growth.

Gains will best occur with a multifaceted approach for which the innerwear is effectively used as a passive extender 24/7. This enables the penis to heal in the extended condition which is helpful to cement permanent gains.

[Stealth Man]

Sorry, we do not have a video at this point.

The resize kit comes with a 12″ length of superior quality tubing that has the ends tapered for insertion thru the beads.

Once you have the tube threaded with beads, you can stretch the tube to move the beads around more easily.

You should orient the clasping magnets together with the large magnet at the bottom, by first clasping the smaller two together and then connecting both side by side with the larger magnet at the bottom.

The proper orientation will be obvious once you test.

Roll the O-rings down the tube and insert the tube over the nipple and after you have tested and are sure of the fit, remove the tube and apply a small amount of the glue to securely bond it with the nipple. Then roll the O-ring over the high point of the nipple and into place against the magnet.

Wipe any excess glue off the magnet and O-ring and let sit for one hour before use, full cure takes 24 hrs.

While using, do not pull directly on the tube to remove the Mag-Volt, instead, break the connection as you would snap a pencil in half. This will make it much easier to pull apart.

Make sure that you always dampen the clasping magnets when connecting them together, otherwise, you risk having them jump out of the fingers due to the high powered magnetic attraction, which can result in chipping.

There is a couple of thin silicone pad included with the kit, use one to adhere to one of the clasping magnets to help dampen the speed of contact. Do not use both pads, just one is enough.

A good method for connecting is to hold the clasping magnets in such a way that the fingers make contact with each other first, then you will be able to easily control the impact on contact.

• This reply was modified 5 years, 4 months ago by Stealth Man.

[Stealth Man]

Hi Stephen,

Your mention of the acquaintance at the gymnasium pool brings an important consideration with respect to the risks involved with advancing too quickly using penis enlargement devices. As men, we often dispel caution to the wind, with an over-enthusiastic bravado that has no place when pumping or hanging weight from the penis. For this reason, we will have the beginners template and the forum community to help keep these tendencies in check.

There is definitely a learning curve involved when using the Vac-Hanger. It is typically recommended by experienced penis enlargement practitioners that the beginner first condition the penis with manual PE exercises for a few months before commencing, what is considered to be an “advanced” technique.

In my experience, this is simply not true, however, the beginner should err on the side of caution, for at least the first month or two of practice. During this time the focus remains primarily on learning proper technique while strictly adhering to the guideline of the beginner’s session template that will be included with the kit.

After gaining some experience, you can begin to actively explore the three session parameters of weight, duration, and frequency in order to optimize the routine intensity. The biggest factor here is consistency, which is needed to avoid interruption of building the intensity momentum. Otherwise, you will need to lower the weight and/or duration of the sessions before resuming the previous level of intensity, which of course hinders progress while adding another variable to be mindful of in your practice.

All in all, vacuum hanging is completely safe when approached with a cautious yet curious mindset. However, lapses in judgment can lead to minor setbacks and outright disrespect of the established methodology of vacuum hanging can lead to injury.

Therefore we must have an active community on this topic once the kit is made available. This will help curb over-enthusiastic tendencies with active support and offer encouragement when the pendulum of enthusiasm is on the wane.

I personally have found the process of hanging to be quite addicting so my commitment has been strong. However, having recently shifted back to Canada there has been a cessation of practice since a month or so in the process. However, this will be useful for gaining more experience on the parameters involved when resuming practice after taking a long break.

 

 

 

 

 

 

[Stealth Man]

That is a very simple fix mate.

For the production units, we now use a silicone tube with a smaller inside diameter for a more secure grip and specialized silicone glue to ensure that the tube remains bonded to the nipple.

Send a message to the support email and we will get you all sorted out with a complete resize kit that includes the new tube and silicone glue with a couple of spare O-rings and silicone pad to dampen the contact of the clasping magnets.

• This reply was modified 5 years, 6 months ago by Stealth Man.
• This reply was modified 5 years, 6 months ago by Stealth Man.

[Stealth Man]

Appreciate your input and support!

You can send us a note at the support email and mention that you would like to get on the premium customer list for the early notification and presale of the Vac-Hanger.

I will be leaving the factory as all the components are currently or just about ready to go into production. This will allow the focus to shift to the patent preparation along with finalization of the instructions manual and packaging.

We are currently working on the product motion graphics which will give an overview of the design aesthetics and functionality.

Once we have the patent applications submitted we can publish the video which will give you all the insight you would need in order to make a decision if this is the kit for you or not.

[Stealth Man]

Good to hear your issue has been successfully resolved CS1

We can leave the thread up for reference if others experience a similar problem.

Just to clarify. The Retainer Bands are available in all 12 girths 18 thru 40 and have no bearing on the length as the same applies to all.

[Stealth Man]

Congrats on the weight loss!

Actually, we hear from girlfriends and wives on occasion who want to make purchases for their boyfriend or husband. They find the idea to be exciting and fun. Some ask to see more pictures of the models we have on file so it’s definitely a turn on for them.

Enjoy!

[Stealth Man]

Whaim, if you are having an intense burning sensation then the silicone ring must be too tight!

You can remove coils from the Corkscrew for a smaller/lighter coil that is easier to put on and wear for longer periods of time in comfort. You can also tighten the coils along the entire shaft to help distribute the load and a more secure fit.

This is the set-up I wear for 8 hours or more before fatigue sets in and I need to take a rest.

I am only using a few twists to tighten the coils directly behind the glans here as you can see the space behind the coils along the length of the shaft.

[Stealth Man]

>>I would also like to get an approximate ETA.  I was in the process of purchasing a Vac Hanger, but will wait for your product,  Based on your customer service and quality of previous products I will wait, but for how long?<<

 

The launch date is still unclear. We are working on multiple aspects of the project, which will suddenly all come together at the same time for more clarity on the release. I’d say another 2 months before this is a possibility and would highly recommend waiting, otherwise you may regret money spent on an inferior system.

[Stealth Man]

>>Any idea on an approximate time line for maybe a presales or trial user’s or testers on this product. As I would definitely be interested in being a tester. I have hit a wall,and am looking for something to get some more growth going.<<

Things are happening but it just takes time to make a complete and fully realized professional kit.

The testing phase is long past so we would be looking at private prelaunch sales here and to our premium customer list.

[Stealth Man]

Yes, the underwear selection has a big impact on the look and feel of the anatomy while wearing Stealth. I did a bit of experimenting and realized very quickly which ones I preferred.

[Stealth Man]

thanks for the positive feedback on the silicone glue!

Yes, it not likely that the bond will be broken without the use of brute force.

[Author]

Posts