[Stealth Man]

Hey, that sounds great UD… let’s see what you come up with!

[Stealth Man]

That’s not really possible UD. The mold costs are way too high and the requests for custom tapers too varied to be feasible. A possible workaround would be to have two different sized Sabre Skins for the different girths at the base and another for behind the glans.

[Stealth Man]

To fix this problem you can use two-part epoxy glue available at the local convenience store. Just a small dab on the end of the nipple which will also lubricate the tube so that it slides easily over the nipple high point. Once in position, roll the O-ring up into the groove up against the magnet.

After the glue has set-up you will not be able to pull the tube off even if you tried. We would do this for you at the factory but then it would not be possible to shorten the tube for a tighter fit if needed.

I just started to wear the Mag-Volt again since a couple of days and although I don’t feel any tingling as some report, I definitely do notice more frequent and much harder erections with a larger flaccid hang as well.

I got excited all over again because it re-confirmed for me how well the product works!

[Stealth Man]

Yes, the Sabre Skin is basically the configuration but made of a different material. The rubber Sabre Skin is designed to be worn over the fabric underlay to wick away moisture however the Sabre Skin can be worn directly over the penis shaft as well. This is something you can experiment with to see what you prefer.

[Stealth Man]

Hello BK,

There can be a conditioning period of about a month or so in which the sensitive skin of the anatomy adjusts to wearing the Innerwear all day. During this time you should take rest for a few hours or overnight whenever you notice any irritation beginning to occur. The sooner you rest the sooner you can resume wearing again. However, as described in your case, I suspect that there may be an issue with the fit being too tight. There can also be a problem with “rug burn” around the underside of the frenulum when the excess skin is not retracted back inside the sheath. It is important that the silicone ring is seated directly behind the coronal ridge of the glans. Otherwise, what happens is that the sensitive skin gets pinched between the silicone ring and the glans when everything gets compressed by the underwear and pants. When you walk the movement causes friction and the subsequent rug burn you describe in this area. I know this very well as I needed to figure out why it was occurring for me early during the development period of the product.

Regarding the ball band. I think most guys do not use the snap buttons however some do and they are there if needed. The difference can be whether the balls tend to ride high and slip out of the band or the anatomy is such that the transition from ballsack to the body is very thick without the classic bell shape contour. In some cases, the snap buttons are preferred and others opt for the sheath only strapless version of Stealth. We will soon be making this available as a regular item for purchase on the product page but for now, it is a custom order that is available on request.

Strapless sheath only Stealth Innerwear

• This reply was modified 5 years, 9 months ago by Stealth Man.

[Stealth Man]

Good to hear Buck, your technique will improve with some practice and the material will stretch out as well to make the process of putting on the Sabre Skin easier.

All the best!

[Stealth Man]

Hello Buck,

No lube. You need to cut the Sabre Skin to the same length as your Innerwear’s sheath section. Once you have the correct length you can fold 2-3 times starting at the base to create a 1 or 2 inch band or donut shape. You can then stretch this over the glans for placement on the shaft just behind the glans. Make sure you keep the tip of the logo exposed and use this for consistent placement on the shaft. Unfold the sections towards the base of the penis until the shaft is enveloped in the Sabre Skin sleeve. I have attached a picture of the 24 girth Sabre Skin folded into the donut shape and stretched over a wide mouth mason jar. I find the D24 extremely easy to put on and off to wear. What size are you working with?

 

[Stealth Man]

You would need to at least add the Corkscrew to your practice along with manual jelqs and stretching. I have seen some minor gains over the years using these devices with off and on manual techniques included. The Vac-Hanger we are working on is now a part of my daily practice since the last 5 weeks. As an advanced technique, it takes some time for the beginner to condition the tissues to the stresses of vacuum hanging. I have measured a 1/4″ flaccid stretched length gain with improved flaccid hang and a slight measurable gain in erect length. I am finding it to be addicting and it’s tempting to amp up the intensity but this needs to be tempered with patience and a commitment to the program template we are currently working on.

[Stealth Man]

These observations and comments are accurate. Gains are made with a practice that combines various methods and devices which contribute to the overall effect training. The biggest factor would be commitment and the desire to exploit the exercises available. Of course, some are not that interested in a dedicated training routine. Whatever the case may be, consistency is key along with some basic manual jelqs and stretching.

[Stealth Man]

Yes of course and you’re most welcome!

[Stealth Man]

We have learned that some of the magnets from the first batch burnt during manufacture. You can see the black charring where the copper has separated in the attached picture. Although not all the pieces were defective, we returned the entire batch for replacement to make sure no more were remaining in our stock.

We will replace your Mag-Volt at no cost. Send us a note on the support email [email protected] so we can access your purchase history.

Regarding the lack of sensations, this would be in the form of subtle feedback you may or may not feel. The measurable current averages about .75 volts +- .15 for the highest reading of .9 volts for relatively weak current. However, the magnets are strong, so it depends on the sensitivity of the individual.

I felt a clear difference in the first two days of wearing which manifested as powerful erections in the morning with a larger scrotal volume perceived as a considerably tighter fit of the Mag-Volt. For this reason, we recommend testing the size for a few days before cutting the silicone tube shorter for a tighter fit as it will fluctuate.

The other noticeable difference was a considerably larger flaccid those first few days and slowly diminished over the rest of the week. I continue to wear the device, but the described effects have since subsided.

 

 

[Stealth Man]

MW,

That is a very impressive size progression!

I wear my Corkscrew in the privacy of my home. I used to go out more with it on but not so much nowadays. In any case, it never slips off unintentionally so you may want to experiment more with the set-up to see if you can make it more secure.

I went commando just the other day, in freshly washed jeans, ie. snug fitting, to be showing much more length than when I wear pouch style jockey underwear. There was also more tendency for sustained semi-erection due to the feel-good factor.

If I understand, correctly you say that your flaccid length now is more or less the same as when you are wearing the Innerwear?

I have heard feedback from others who report wearing the spandex sleeves as an underlayer to the Innerwear. I have never tried it myself as I am satisfied with the spandex sleeves layered on top of the sheath with the silicone ring seated directly behind the glans. However, the component system is designed to provide creative options so that you can find what sort of arrangement works best for you.

I like how you ordered the larger girth Sabre Skin with the intention to wear it on top of the Innerwear with multiple layers of the spandex sleeves.

We will be considering to make a new version on the ball stretchers in the future. There is room for improvement on the current designs available in the market.

Thanks for the in-depth feedback on your Stealth experience.

Very helpful!

 

[Stealth Man]

Great! Let us know how the resize works out for you.

[Stealth Man]

sure, just send us a note with the details at the support email [email protected] and we will be happy to sort out the fit for you.

[Stealth Man]

Very enjoyable read Stephen.

what ingenuity and excellent storytelling as well.

cheers!

[Author]

Posts