[Stealth Man]

Hello @phxchris18

Begin by pressing the on button for two seconds and you will get the red colour which is “high”, press again for blue which is “medium”, and again for green which is “low”.

Far Infra-red heat is not as “hot” to the touch as lower vibrational frequencies. However, you can wrap the pad tightly and “preheat” for 20-30 minutes before use and it will feel plenty hot. Make sure you also wrap tightly on your penis for a hotter feel as well. Note after using the temperature of the penis which will be thoroughly heated up as the FIR penetrates deep into the tissues for remodelling  go the collagen microstructures

I personally cannot take the high setting as it gets too hot for me when preheated in this way.

[Stealth Man]

Good to see you again UD,

The cost for quality product doesn’t come cheap. We are also taking a big hit shipping international with some unexpected surcharges up to and over $250 which we simply had to eat for our customers.

The cost of operating a business includes the school of hard knocks specially when developing new products where numerous avenues leading to dead ends must be explored to find the optimum path to completion.

We spent well over 200k and 5 years of intensive development to bring this baby to market… so the returns are still not in our favour.

No problem, we are almost ready for the new compression hanger with the production moulds already made which now only require a few final tweaks to sort out…. besides the ultrasonic welding equipment we need for assembly.

Then we have to complete the case and foam design before production with instructions and patents applications to submit.

However, this has “only” been a three year project with much less capital involved so the price will be considerably lower that the Vac-Hanger… mind you it is no less innovative or lacking stellar aesthetics.

The new spring extender is still in the design stage… but wow.

Everything we earn goes back into new product development so when you make a purchase with us you are in effect supporting innovate tool creation that will make your PE journey more exciting and enjoyable with real results in the future.

[Stealth Man]

Mido E,

Thanks for the demo video.

Actually the size looks perfect to me. If you attempt to stretch full length the penis will retract and the glans will slip past the silicone ring when sitting. Girth looks good as well doesn’t appear too be tight at all. The material will break-in for a more comfortable fit after 7-10 days of wear.

If you do want active stretching to full length then I suggest the Corkscrew. You can wear this 2 to 6 hours per session depending on the time required to reach the fatigue state. This will depend on your experience with active stretchers.

Here is the link to the demo video for wearing the Corkscrew…

https://stealthformen.com/wp-content/uploads/2023/03/Corkscrew.mov

[Stealth Man]

Hello Mido,

Yes, I would say you need a size or two more in length and a possible size up in girth. You can contact me at the support email: [email protected] for help to determine the correct size and the invoice sent for the replacement in the size of your choice with a resize discount.

[Stealth Man]

Actually, this sounds like a perfect solution particularly as the foreskin is more of a challenge. I appreciate the creative application and thanks for the contribution!

[Stealth Man]

Hello GrowertoShower… welcome!

The key to the spandex sleeve method is to find the optimum placement on the shaft which seems to be around the 1/3 to 1/2 down the shaft. The difference being more difficult to get off after placement of the sleeve on the shaft or that the spandex sleeve gives way and pulls out before placement of the Innerwear. With a bit of practice you can dial in for the optimum placement. Mind you I am cut so the dynamic no doubt is not going to be the same.

As I understand it, you place the rubber cocking over top of the spandex sleeve behind the glans and then the Innerwear over top for easy removal after placement…  or possibly it is placed directly on the shaft with the spandex sleeve over top for a friction grip that is easy to remove after placement of the innerwear on the shaft?

It is always interesting to see the unique solutions different users are coming up with. For this reason Stealth now focuses more on providing a range of components in support of creative applications.

Thanks for the tip!

[Stealth Man]

Hi Mark,

You can continue scaling the wear time and but keep alert to any irritation that many begin to occur. If irritation begins to occur you can take a break until you recover and then start wearing again.

Some guys require more conditioning before full time use while others not so much… it is a personal thing so you must find your own path.

I was wearing my Innerwear almost continuously for the first 4-5 years. Basically around the clock, even while sleeping, and when a number of customer told me that “they never leave home without it”… I had to laugh because it was exactly the same for me.

All the best!

[Stealth Man]

hello @phxchris18

We are working on the digital 3D renders now for uploading to the product page before announcing the ADS Belt System and FIR Graphene Heat Pad for sale on the newsletter. I am not sure exactly when this will happen but you can contact the support e-mail at [email protected] to get advance access for purchase by invoice… or if you had any further questions.

 

[Stealth Man]

Yes, you will also find the companion manual with beginners template/user log book and suggested 3 month starting routine with all the recommended details for a progressive routine with respect to weight/vacuum/duration/frequency to safely reach 8 lbs after the 3 months.

[Stealth Man]

@Sparkplug @phxchris18

No the weights are not included with the kit… and that is not 40 lbs!

Actually, it is six 2.5 lbs plates stacked horizontally with two 1.25 lbs plates hanging vertically for a total of 17.5 lbs. This amount of weight is not difficult to attain, however, beware of chasing numbers and over looking the optimum weight required to initiate the fatigue state.

Yes, you can always get these plates at your local Walmart. Two 5, two 2.5, and two 1.25 lbs for just over $40

Here is a screenshot of the same…

 

I use plates similar to this one..

We will be introducing Stealth Branded rubber coated plates at some point with a couple of .5 lb’ers included in the set for a total of 18.5 lbs.

[Stealth Man]

hello @ahudson5

Yes, you could experiment with water surrounding the glans in the chamber as a means for direct pull. However, this will not prevent the tendency for cavitation to occur under traction in which separation of the glans from the chamber wall forms an air pocket within the liquid. In any case, separation from wall is the leading cause of blisters formation.

However, Stealth has developed the principal of Glans-Lock™ into a science. When this principal is properly applied the bond between the glans and chamber  is rock solid as if being cemented in place. With such a connection there is no space for water nor expansion of air volume under traction.

Certainly not up to 15 lbs or so at which point less than perfect application of the Glans-Lock principal will be tested, and if not exactly right… separation of the glans may occur after this point.

Do report back on your experience. Btw, just make sure that you have a water separator in place to eliminate any chance of liquid entering into the vacuum pump, otherwise there will be problems.

[Stealth Man]

Yes, the male anatomical proportions can vary widely between individuals in so many ways.

We have our standard 99 sizes which grew out of necessity over the past 12-13 years after starting out rather naively with a presumed 15 size selections being more than sufficient. And beyond that, for even more personalized fittings, we manufacture to meet the need for an array of custom sized configurations, nature of the beast… so to speak.

This involves for the most part tapered sleeves which are wider at the base that taper down for a tighter fit behind the glans at a mild angle or straight to mid-shaft before tapering steeper down to the glans.

We also have guys who require straight cut sleeves with a size or two smaller silicone ring when the shaft is thicker with a relatively less pronounced coronal ridge of the glans… to secure the flaccid in extension throughout the day without slipping back under the silicone ring when bending over or sitting.

In your case, we have the self described “Portobello” effect… which is something to be proud of in my estimation. Now this may require some adaptation with a smaller sized Sabre Skin over the shaft, your current 24 girth sound about right, combined with a larger Chamber size, Glans-Cap, and Vac-Seal.

One could even experiment with a double layering of Sabre Skin to bring the shaft diameter more into alignment with the chamber base to see if that would offer a suitable path of optimization in the pursuit of the ideal set-up.

For this purpose, a larger chamber set including the Glans-Cap and Vac-Seal seems to the direction to take at this point. Stealth offers, exclusively to kit owners, additional C-Sets of any size at $50 for the first set and $25 for additional sized sets after that.

However, in your case, as I had advised to go ahead and break the shrink wrap seal we can make your first C-Set selection at the same $25 with additional sizes for only $25 as well. All sizes include all three components… Chamber, Glans Cap and Vac-Seal.

Chamber sets will not be available for purchase to the general public at any price.

Take your time to consider and then let me know what you think.

[Stealth Man]

Good to hear your initial feedback.
​
​Firstly, yes… we will be making a comprehensive series of video instructions once I get back to the factory on the 18th of this month.
​
​The idea behind the user manual is to provide 4 basic methods for setting up the device. It will be up to the user to experiment and find out through the process of experience which method they prefer. I find that I generally stick with a particular method for a couple of weeks and then make some adjustments for a different feel which may include the use of a different size chamber. Further down the road as you gain more experience the options are exponential for fine tuning the set-up to meet your unique creative impulses.
​
​Right now, as a beginner, the choices are certainly wide open and which path to follow to the top of the mountain will not be exactly clear. However as you endeavour on your journey specific paths will open up for passing certain sections before a plateau is reached, where, again… various options will present themselves with false starts and resets along way to becoming an expert climber, or in this case… expert hanger.
​
​For the most part, the kit is an extension training device designed for making length gains, however, as mentioned in the manual, you can incorporate the advanced techniques for bundling and fulcrum hanging for some emphasis on girth gains as well.
​
​I appreciate your thoughts and will include this post as “customer questions” on the Stealth forums so that you can follow along for updates on the video instructions that are coming soon.
​

All the best!

[Stealth Man]

hello @Sparkplug… good to hear about your initial experience with the Innerwear.

Putting on the Innerwear easily would indicate that the size is correct, however, the engorged glans also indicates a tight fit but not so much that you would want to make any size changes quite yet. If the fit was really too tight the engorged glans would be dark purple with some degree of discomfort which would demand immediate attention. I suggest giving it some more time for the break-in period in which the material will stretch out to fit over the first 7 – 10 days of daily use. The cooler glans is not a problem as the temperature of the glans fluctuates normally although more frequently under extension.

As your observation skills are sharp you can keep a close eye on things as they progress before coming to a conclusion on fit. Let me us how it goes as it will be helpful for others to hear about your experience with feedback on potential remedies and what-have-you’s as the fit stabilizes.

We do offer custom fittings when required, which typically involve tapered sleeves to a tighter fit behind the glans or a straight sleeve with smaller silicone ring when the shaft width to glans size is not so pronounced as well as substantial discounts on straight up resizes etc. Btw. you can send your request to the support email at [email protected] to receive a link to the demo videos for wearing the Innerwear, Sabre Skin and Corkscrew. We even have a video for setting up the Premium Sleeves with a few folds over top of a Retainer Band positioned behind the glans combined with the Ball Straps… which I have been wearing most recently to good effect.

Regarding your new Vac-Hanger… congrats!

I would not worry about the size selection as the fit of your innerwear is so close that it would not be of much consequence one way or the other. In fact, I wear the 24 girth (D series for length too) as well and rarely find myself using the 26 girth chamber with more focus on the 24 and 22 chamber sizes. The 26 is there if you need it but I feel users will tend to size down on additional chamber purchases when they want to expand their range of chamber options. Particularly for ADS extension training in the flaccid condition with low intensity all day stretching. For this purpose, I wear the 20m or even 18 girth chamber sizes. The larger size is always there for glans expansion purposes and future gains in size.

Thanks again for your posts!

[Stealth Man]

I laughed out loud over this line…

“feel free to use it on the rest of yer junk and any small wounds (I have a cat)”

I kind of blended the sentence to read as though you were getting small wounds as a result of having a small cat that played with your genitals… too funny.

Agree with everything in your post… and thanks for all the in depth details.

In fact, you can set up the spandex sleeves to cover the glans for protection from keratinization. This is not an uncommon concern from customers who are uncircumcised and feel too much sensation from the exposed glans. Particularly when rubbing against the underwear while moving around.

Here is a pic of the set-up that can be used for this purpose…

 

 

[Author]

Posts