Vac Hanger Pro Water Cushion

Home Forums Stealth Vac-Hanger Pro Vac Hanger Pro Water Cushion

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #78342


    With the Vac hanger pro can you use a water cushion? For some time now in my vac hanger, I have used a water cushion when vac hanging and get no blister by using this method


    Stealth Man

    hello @ahudson5

    Yes, you could experiment with water surrounding the glans in the chamber as a means for direct pull. However, this will not prevent the tendency for cavitation to occur under traction in which separation of the glans from the chamber wall forms an air pocket within the liquid. In any case, separation from wall is the leading cause of blisters formation.

    However, Stealth has developed the principal of Glans-Lock™ into a science. When this principal is properly applied the bond between the glans and chamber  is rock solid as if being cemented in place. With such a connection there is no space for water nor expansion of air volume under traction.

    Certainly not up to 15 lbs or so at which point less than perfect application of the Glans-Lock principal will be tested, and if not exactly right… separation of the glans may occur after this point.

    Do report back on your experience. Btw, just make sure that you have a water separator in place to eliminate any chance of liquid entering into the vacuum pump, otherwise there will be problems.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Only users that have purchased Stealth products can participate in the forums.

Latest Topics