[Stealth Man]

The Stealth Vac-Hanger will be the most versatile design available anywhere. To give you an idea here are just a few of the many standard features in store.

The kit will come with five bell housings per size. So if you wear the 24 girth you will also get the 20, 22, and the 26, 28 sized bell housings with your kit.

The size increments are only 2mm apart for scaling a precision fit which may vary one session to the next depending on your preference. This same choice is available for all twelve sizes that Stealth offers 18 thru 40 plus 14-16 and 42-44 for a total of sixteen possible bell housings!

We have perfected the glans lock™ system for securing the glans within the bell housing. This technique eliminates separation of the glans from the bell housing under moderate and even heavy loads of up to 25 lbs.

This wide range of sizes with small increments allows the user to wear the smaller bell housings for discrete all day hanging with a completely flaccid penis securely locked in. Or the fully expanded glans with one of the large bell housings for the more intense hanging sessions of shorter duration where discreteness is not the primary concern.

There are two strap types available with each kit. One is the seatbelt type webbing for the hanging of heavier weights. The other uses a lighter elasticized strap for discrete all-day traction in literally any direction depending on the chosen location of attachment.

At this point, we are not ready to go into more detail on the functionality of the design other than to say it looks “next level” as well.

 

[Stealth Man]

Good to hear.

I will be back at the factory mid-March to resume working on the finalization of the Vac Hanger kit. This device will set the bar on hanging systems with its advanced design and highly versatile components. We will make the first orders available to the forum members here before pre-launching to the newsletter recipients. We anticipate another 3 months before we are ready to ship.

You don’t want to miss this!

[Stealth Man]

Hey, Bigjuan12 welcome back!

Yeah, that was the original packaging from 4-5-6 years ago.

No idea what the problem is with the upload. Just click the search icon on the right and select the file then click “ok”…. no?

[Stealth Man]

Chookz,

The Mag-Volt™ has three powerful copper or silver plated magnets, the two on top work together as a clasp for taking the device on and off and the third single magnet at the bottom to generate a deep penetration magnetic field. The two metals on either side are made of solid high purity zinc which reacts with the copper/silver to create a mild galvanic current that measures up to .9 volts. The combined Magnetic field and low Voltage electric current improves metabolic function at the cellular level for accelerated healing, increased testosterone production. Zinc supplementation supports the enzymes that regulate cell division, growth and wound healing.

If you want to know more you can contact us at the support email [email protected] for more information.

[Stealth Man]

Ujjayi,

Loose threads are par for the course. We trim as many of these off during the manufacturing process as we can. However, depending on the type of thread it could lead to problems if you pull it off. Cotton threads are not an issue, but if it is the nylon thread used for the complex seam the secures the double layer sheath section as it transitions to the single layer, then you would want to use a lighter to carefully melt the thread at its source which in effect will melt the thread and prevent it from coming loose any further.

[Stealth Man]

Yes,

When you clasp the two smaller magnets together and then bring them into contact with the larger magnet, they will automatically be attracted in the correct orientation of the poles. It will then be clear which end of the silicone tube to attach to each of the clasping magnets. The magnets will be repulsed and flip if you have it backward.

[Stealth Man]

Lol… for all you know, she could be thinking you’re just a kinky guy into older ladies :))

On a more serious note, you could try removing coils with a box cutter if you want a lighter smaller profile that is easier to put on and wear for longer periods of time in comfort and convenience ie. less risk of falling off. There is a small vinyl end cap included with the kit for sealing the wire.

I like to wear my D24 with 3 coils removed for a much more versatile Corkscrew.

[Stealth Man]

For this reason, I wear my Corkscrew in the privacy of my own home or maybe out for a walk to the corner store.

I think without a fair bit of experience highly social situations such as you describe are just too risky to take a chance.

The lady at the church… lol sorry, but that is too funny! She must have figured that she “set you off” in one way or another!

In the end, it sounds as if you came thru without damage to your reputation and/or “privates”.

Proceed with caution, my friend!

 

[Stealth Man]

Thanks for the feedback.

The Sabre Skinâ„¢ is food grade and safe for internal use ie. sex toys. Contact with the skin will pose no danger or risk whatsoever. You can wash with warm water and mild soap. Air or towel dry.

The Sabre-Skinâ„¢ will conform to the shape that it is stretched over. In which case, you should be consistent with the placement to maintain the shape and curve that it takes on.

I have worn the Innerwear to chlorinated pools and hot extensively with no problems. However, I used the same Innerwear exclusively for the pool and reserved a second Innerwear for regular use only.

I have not tested the Sabre Skinâ„¢ in chlorine but I highly doubt there would be an issue with the TPE as it is a very stable material.

For swimming, I recommend wearing an unstretched Skin directly over the shaft of the penis with a second Skin on top which will stretch out to size. Although you will not have the same degree of extension with this double layer it does, however, make for the most realistic looking and feeling flaccid possible under a wet tight-fitting swimsuit.

Water-based lubricants are fine but silicone or oil based should be avoided just to be safe.

Ideally, you should use the plastic bubble pack the Sabre Skin came in (or equivalent) as a tray for storage.

 

 

 

 

[Stealth Man]

No problem Tekcon.

Send us a support email and we will send you a 12″ length of replacement tubing. The tube will be sliced 1.5″ down the middle for easy insertion thru the beads. Once the three full-size beads and O-rings are placed on the tube you can cut the tube to size. Make sure that it is a bit longer than you need and test otherwise you risk cutting off too much tube. Fit the tube over the nipples of the clasping magnets and roll the O-Rings into place.

A key point to note. Before attaching the clasping beads on to the tube make sure that the N and S poles are in the correct alignment with the bottom magnet.

If by chance the silicone tube is slipping off the nipple in use, you can use a small dab of 2 part A/B epoxy glue from the corner store to permanently bond the tube onto the nipple. You want to be sure you have the optimum fit before committing to the bond.

[Stealth Man]

great overview Stephen… thanks!

[Stealth Man]

excellent!

[Stealth Man]

Thanks, Whaim.

Everything we do at Stealth is original. We will re-invent pre-existing products only if they are in need of radical improvement. We would never stoop so low to copy or imitate a well thought out product. You will see this more clearly when we launch the new Vac-Hanger.

The Mag-Volt™ was a relatively minor project taken up to fill the extended time needed for the Vac Hanger to be ready.

I like to wear two Mag-Volts™ in tandem side by side to create a thicker ball band similar to the Stealth Regular when wearing the Extension Sleeve or sheath only Stealth.

 

[Stealth Man]

A few mentions of the pubic hairs being problematic have been reported. I personally have not had any issue with this. However, after a week or so of use, the Sabre Skin will lose its tackiness and becomes less of a problem with hairs.

[Stealth Man]

The Sabre skin is sized for the girth only. The standard length is 8″ which as Whaim mentions, is cut to size. We were working with a temporary off-site payment page for this offer which did not give us full control over multiple products and shipping costs so we had to manage with workarounds. In any case, if your size was a D24 then you would get the 24 girth Sabre Skin which could be cut into two “D” length sleeves. If the Innerwear or Corkscrew was included with the order then we would also know what size to send.

 

[Author]

Posts