[UmbralDragon]

Well, Stealth Man, that’s taking ‘hanging out at work’ to a new level 😉

[UmbralDragon]

I think I’ll do a video on how to put on the Sabre Skin, as I think it might help people to figure it out. Might be a few days, but I’ll drop a link when it’s ready. I’ll probably do one for the Mag-volt, after I get mine, and figure it out completely.

Have fun all 🙂

[UmbralDragon]

I kinda figured, but I wanted to ask, so as to know for sure one way or the other.

Thanks 🙂

[UmbralDragon]

The Sabre Skin works really well in lieu of the Stealth, for those days when you want the extra stretch, but without being quite as obvious. (going commando in biking shorts, for example.) It’s also reasonably easy to put on and take off with practice. I’ve noticed that it’s easier to do with either a full erection, or a semi, which makes it easier to use both hands to place the Skin with less error. I’ll also use a silicone ring just behind the glans to help keep the Skin pressed into place firmly.

 

Hey Stealth Man, do you guys make a tapered version of the Sabre Skin? I know it’s less easy to customize than the inner wear, but I wanted to ask, just to be sure one way or the other.

Happy Stealthing 🙂

[UmbralDragon]

Stealth Man,

Ouch, it hurts just thinking about that one. I hope you weren’t injured. That’s taking “research” to a painful level.

I’m still looking forward to ordering a Mag-Volt, but due to the holidays and more days off than I would have preferred, it’s going to be a bit longer. I just hope the discount will still apply.

Good stories, guys. I recommend using something to keep those magnets properly protected from impact. (perhaps a layer or two of surgical tubing on the outside to act as a shock absorber?)

Happy Stealthing 😉

 

[UmbralDragon]

Methinks that Christian might be a bit too happy to get his pecker into the new toys 😉

Anyhoo, any info on what the prices will be for the Vac Hanger and the Sabre Skins, and Mag Volt? I’m pretty sure I’ll be getting one of each of my sizes, at some point in the not-too-distant future.

Thanks 🙂

[UmbralDragon]

That doesn’t surprise me. I’m glad to see that you guys are getting the new stuff out soon. I’ll pick up one or two sheaths when I am able to do so. Would I be correct in guessing that if I go with my bigger size it’ll still fit snugly enough to work for how I use it (with other Stealth components, etc.?)

I’m also looking forward to the Vac Hanger. Any news on that one? 🙂

Thanks 🙂

[UmbralDragon]

Hey Stealth Man,

Just curious as to what sizes you still have available. If you have mine, I’ll probably pick one up at some point in the not-too-distant future 🙂

Thanks, and happy Stealthing.

[UmbralDragon]

If you want a tester for the new design, let me know. I think you guys still have my size info for the taper, etc. I have to say that the taper works well for me, but I’d be very interested in trying out/testing the fully adjustable one. You can expect good feedback from me.

Anyhoo, have fun with the new ideas 🙂

[UmbralDragon]

Heya Stealth Man,

It does lock, to a degree, but if I tighten it a fair bit, it slips back, so I think it could stand to be about 1.5 to 2.0 times as strong. Other than that minor quibble it works really well. In all honesty I think this would work better for most guys than the snaps. Adjustability is key, and really handy.

How are things going on your end of the world? 🙂

Also, any new items to try out?

Thanks 🙂

UD

[UmbralDragon]

Just a quick update to show you guys how things are going. I haven’t really had any actual stretching of the scrotum, but I’ve been trying out combos with the Stealth and the Stretcher, that seem to work well. See picture below. It’s pretty comfortable, and I can wear it for a while (especially at home, when hanging out freely). It’s the same stretcher that I picked up before.

Oh, and Stealthman, the custom stealth that you made for me with the drawstrings in place of snaps is amazing, but I think that the string retainer might need a stronger spring to prevent pullback.

Anyhoo, let me know your thoughts 🙂

 

UD

• This reply was modified 6 years, 2 months ago by UmbralDragon. Reason: Image wouldn't work, had to use link
• This reply was modified 6 years, 2 months ago by UmbralDragon.

[UmbralDragon]

Just an FYI for those of us who are worried that the Stealth might pop off and fall out of trousers/shorts. Try wearing some very lightweight briefs (under your shorts, or trousers, even swim shorts, since the ones I link to below dry pretty quickly) that have a pouch for holding your package separately, it’ll catch anything that might decide to fall off, and will keep it secure until you can get to it to replace it, or stick it in a pocket. It’s happened to me a few times when wearing a metal glans ring, but isn’t a big deal when one is prepared.

I like these, because they’re comfortable, and keep things in place. They also help if I’m wearing a ball stretcher, and perhaps a glans ring, so they don’t bounce into each other. They also work well when using the Stealth. Although they can accentuate the equipment, rather than hiding it.

I do suggest checking the sizing chart, and perhaps ordering a size up.

Hope this helps 🙂

[UmbralDragon]

If you have access to a hardware store (pardon the potential pun, given the context), I’d suggest picking up some plasti-dip, or something equivalent, that will adhere better, and won’t as readily fall off, as electrical tape might, and you do not want to be exposed to the lead core of the Corkscrew.

But at least Superman won’t be able to x-ray your pecker, kind of, depending on how tight the coils are…

As far as tips? I’m afraid I haven’t had time with the new job to even consider trying to wear the Corkscrew, especially since I’m also on my feet all day, but without the ‘luxury’ of shorts, or general comfort. But, at least I don’t have to wear a tie anymore (I hate ties.)

As for plunging… It’d make one hell of a fishing weight 🙂

[UmbralDragon]

I was able to wear it for a while, but the bike turned out to not be an option, the stretcher was pulling just a bit too hard for that to be comfortable. I ended up having to take it off after a short while.

A word to the wise, don’t try to wear a stretcher if your ball sack isn’t fully relaxed, it just won’t be comfortable to put on, or to wear. Oh, and use lube to help put it on, even if the sack is fully relaxed, it helps prevent pinching by allowing the skin to slide around freely. (try to dry your hands before putting the stretcher on, so that you can keep hold of the metal.)

• This reply was modified 6 years, 7 months ago by UmbralDragon.

[UmbralDragon]

I think this arrangement might work pretty well, I guess we’ll see.

As you can see, I’m trying out a base ring, stretcher, silicone base ring (for pinch prevention behind the balls), a glans ring (because I like the weight), and a premium sleeve for pinch protection on the shaft. This should prove interesting to ride a bike with 😛

Happy Stealthing 🙂

[Author]

Posts