Forum Replies Created
-
Hello,
Thanks for your interest in the new Stealth Vac-Hanger Pro.
Extension training can be done at any time during the day. At which specific time depends on what works best for you… not unlike training for fitness.
Vacuum hanging is possible at high intensity for short duration sessions of up to one hour duration. Frequency would depend on your goals, dedication and lifestyle. Ideally you would train twice a day or at least once a day or even three times a week. The most important factor is consistency.
The accessory ADS belt system for All Day Stretching is ideal for low intensity long duration extension training. It can be set-up to wear under clothing during your normal daily activities for up to 5 hours or more at a stretch.
The parameters of the training routine would depend for the most part on your commitment and interest. I personally like to take a one month or more de-conditioning break after 3 months regular daily practice.
Results vary from individual to individual and are dependant on several factors such as age, body type, diet and nutrition, smoking and drinking habits, dedication and commitment to regular practice etc. It is well known in the PE community that some guys gain fast and easy while other “hard gainers” are slower to respond. However, 1/2″ gain in 4 to 6 months is not unusual with many guys claiming 2″ length gains after years of dedicated training.
The kit include a selection of suspension belts for a variety of attachment methods for hanging weight. The kit also includes a traction cord for attachment to suitable anchor point such as a door handle or bed post with digital scale for measuring the equivalent weight under suspension…
Safely hanging weight from the penis for size gains requires intelligent use with respect to the proper set-up and listening to feedback from the body in the form of sensations. The biggest risk to vacuum hanging is blister formation due to improper set-up and/or over aggressive pursuit of more weight for faster gains.
When the principal of Stealth “Glans-Lock™ is applied the risk of blisters are practically eliminated with a cement like bond between the glans and Chamber walls which effectively prevents cavitation, or formation of an air pocket within the chamber, which is the leading cause of blisters.
Safety is insured when the primary aim is to coax gains by inducing a sustained mild to medium state of fatigue or condition of plasticity for effective cellular remodelling. Risk becomes a factor when safety is ignored with blind pursuit of heavier weights for higher intensity irrespective of feedback from the body that would indicate otherwise.
The kit includes an in-depth user manual with beginners template/routine logbook which covers all your questions in detail.
Here are some photo of the product in use…
Please note that the accessory ADS belt system is a separate $65 purchase with ankle, knee and waist belts for down the leg, around the waist and over the shoulder for low intensity/long duration extension training. All other components that are seen in the pics are included with the kit.
I was just reviewing the questions and note that I overlooked a few of them.
Hanging weight from the penis, whether it be a vacuum or compression hanger, is the most effective means of achieving gains in length. However, girth, at least in the flaccid condition… is intimately related to length. When length gains relax the penis will fatten up with the redistribution of mass for a heavier overall flaccid hang.
With respect to erect girth gains there are a couple of simple “advanced techniques” that can be implemented such as bundles and fulcrums.
Bundles involve rotation of the shaft 180, 360, or 540 degrees to effectively twist the penis around by 1⁄2, 1, or 1 1⁄2 times. Twisting of the shaft activates the cellular structures for accelerated gains in both length and girth. This effect is similar as twisting a wet towel to wring out the excess water with the increased potential for tissue expansion with re-absorption of blood after the torque is released.
Step 1: Twist the shaft around to the desired number of rotations.
Step 2: Insert the Carbon-Fibre Tube (included with the kit) through the carabiner and use the thighs to secure in place when standing and the ankles when sitting.Free spinning manual rotations are another possibility. For this method, manually spin the desired number of rotations in one direction and then release, or hold, before spinning back in the opposite direction. Experiment to find the most effective speed of rotation and duration of hold.
Fulcrums utilize the Carbon Fibre Tube (included with the kit) placed over the thighs in the seated position. The shaft of the penis, with Sabre Skin left remaining full-length, is draped over the tube for hanging weight.
The diagram below illustrates how the Carbon-Fibre Tube acts as a fulcrum to harness the power of leverage and weight for amplification of the stretch around the fulcrum.
L= leverage / F=fulcrum / W= weight
For glans gains the larger sized chamber can be used for hyper engorgement of glans under vacuum. In this case, the chamber size must be accurately fitted to prevent over expansion to the point of tissue damage which will be indicated by an easy to recognize “stinging pain” that will become unbearable if ignored for too long. As always… pay close attention to feedback from the body in the form of sensations and respond accordingly.
As you have three closely sized Chambers in each kit, one smaller and one larger than your size selection ie. if you select size 24 you will also receive the 22 and 26 sized Chambers. The fit can then be precisely modulated with more or less tape to achieve the optimum level of engagement while also establishing a friction grip to help secure the chamber in place to prevent slippage under the applied traction achieved by hanging weight.
hello @spamscottc
Thank you for acknowledging the attention to detail that was required to bring this project to fruition… it has been a real learning experience for sure.
In answer to your questions…
The vacuum is isolated within the chamber as the base of said chamber is cinched down into place over the tapered inner lip of the vac-seal. This further compresses the Sabre Skin onto the shaft for an air-tight seal.
The glans cap with vacuum channels will contribute to this effect but is not necessarily needed depending on your preferred set-up for a given session.
Here are a couple of images from the comprehensive user manual included with the kit…
This image illustrates how the components are aligned to create an airtight seal with the tapered inner lip of the Vac-Seal (hatch lines) to create a clamping effect on the Sabre Skin over the shaft behind the glans (no tape).
The second image (with tape) does not include the Glans Cap, however, the seal is not compromised in any way, so the set-up is a matter of preference, which can be determined with a bit of experience. I personally like and use both methods.Btw. there are 4 basic methods described in the user manual, however, there are a wide array of potential sub-variants for users to explore and discover on their own and share as well.
These two set-ups demonstrate the utility of having multiple closely sized Chambers available in each kit. Btw, although you would think that including the Glans Cap would require a larger chamber size… the reality is that the glans is compressed so that a smaller Chamber is more effective. Whereas, the tape only method allows the glans to expand under vacuum with the chamber walls precisely fitted to limit risk of over expanding the glans. The fit can be fine tuned with more or less tape, as required. Level of engorgement effectively modulates the fit for a secure grip when using the Glans Cap.
The accessory ADS system which is used for all day stretching (sold separately) includes ankle, knee and waist belts for extension down the leg, across the waist or over the shoulder. For the purpose of concealment it is recommended to purchase an even smaller chamber size (available to kit owners at discounted prices) as it is required for setting up in the completely flaccid condition.
The completely flaccid set-up is not recommended for high intensity/short duration extension training with heavy weight, for which Glans-Lock™ with full engorgement is highly recommended to create a cement like bond between the glans and Chamber walls to effectively eliminate slippage under heavy traction. The user manual goes into detail on the principal of Glans-Lock™ among other innovative new ideas.
Traditionally, chambers are sized at a specific level of engorgement for purchase of a single “recommended” chamber size or at best small, medium, and large options which are typical cause for sub par performance. The reality is, users need a range of chamber sizes to optimize the fit for any number of methods and levels of engorgement. What Stealth has learnt over the past 12 years, if anything, is that highly creative users inevitably tend to customize to meet their own particular specifications… therefore, we always look to offer choices rather than impose authoritative rules with subsequent limitations.
Having said that, various tapes and taping methods are suggested in the user manual but experimentation will determine individual preference. The tapes provided will last for quite some time, depending, and are available at relatively insignificant cost per use. Use of the Glans Cap will eliminate all but the most essential tape which is required in minimal amounts to protect the urinary meatus or pee hole.
Once you have the kit in hand, have studied the user manual, and experimented with a bit practice you will get a much better understanding of the individual components and various combinations and methods with more specific questions and possibly some new ideas to share yourself.
All the best!
The price is $375.
The initial 300 launch units will be available on a “first come/first serve” basis so depending on your size requirement some will be selling out faster than others.
The sizing is for girth only so if you already wear a particular sized Innerwear or Sabre Skin then you would stick with the same girth. For example, if you use the D24 Innerwear then you would select the 24 girth Vac-Hanger Pro.
We have an in depth user manual included with the kit along with the beginners routine template to follow. We will also be having some demo videos made once I get back to the factory on the 18th of this month.
We can also share our experiences here to get a better understanding of the tips and tricks that can be used to optimize your experience. The first month or so is recommended to use lighter weights with the emphasis on the proper technique for assembling the device for wearing while paying close attention to differentiate the array of sensations arising from the body as a form of feedback.
During this time conditioning of the urinary meatus or pee hole to vacuum exposure will take place as well. However, there are numerous strategies to minimize this effect.
As a side note: there are many possible options for setting up the components set so we can get quite creative in coming up with new and unique styles or methods. The User Manual details the 4 basic methods but sub variations are a plenty.
I look forward to sharing more in response to hearing feedback from others.
Btw. the comfort level is amazing although the fatigue state, which is the aim of hanging, can begin to set in as the hour long session counts down. However, we have several strategies that can be used to minimize or maximize this most desired effect… depending on what is required to maintain the optimum state of plasticity for cellular remodelling.
Optional set-up using kit components (except the weight plates)…
The basic kit is designed for high intensity / short duration extension training with weights. However, we have the accessory belt system that is used for extension down the leg as seen in the attached pic. It also includes a waist belt for stretching horizontally across the hip, or vertically over the shoulder. The price will be announced just before we make the sales page available.
