[Stealth Man]

Agree with Masao13… sounds like you need a size smaller in girth.

How are you for length? If the sheath is too long it can also contribute to slippage. As a passive extender the innerwear needs to be sized 1/2″ less or so than full shaft extension. This amount of room will allow the penis to yield to the forces of retraction that occur when sitting as the pelvis shifts back with forward rotation of the hips. This is the acid test for the correct size with respect to slippage.

Another consideration is the shape of the shaft. Is it relatively straight or contoured? If needed we can custom cut the sheath to fit accordingly. It’s not uncommon for Stealth users to require this option.

Another good point Masao brings up and is probably the biggest challenge when dealing with slippage. Is there a less pronounced coronal ridge so that the silicone ring cannot properly seat itself to grip and maintain positive extension?

What size are you wearing now if you don’t mind me asking… if you prefer we could discuss these details in private (sorry that we don’t yet have the PM feature)

 

[Stealth Man]

great post Jockinthebox!

I will have to come back and read this a few more times to make the most of it… thanks!

[Stealth Man]

We have a vac hanger in the works as well as a combo water/air pump.

The vac hanger design is nice and clean with a few minor new features as well. It will be available in the next 2-3 months.

The pump will set completely new standards with full control over the water/air inflow/outflow. Each part is being factory made to spec according to a carefully thought out and fully integrated design. Launch date will be sometime in early 2018.

In late 2018 to early 2019 the new spring loaded extender is being planned. It will be fully compatible with the vac-hanger but also feature a major breakthrough in design.

These product designs are pretty much finalized except for some minor adjustments with respect to the manufacturing details that still need to be worked out.

Beta testing hasn’t played a big role in our development process to date. However participants who establish leadership roles in the community will receive free samples of the very first product off the assembly line. We will also be offering major discounts to active members during the prelaunch stage. This would be available to those who are making significant contributions to the Stealth community in general or in a particular field of expertise.

Once relationships begin to form and exchange of ideas start taking place then beta testing would become a definite possibility.

[Stealth Man]

I just posted this response to the same question on another thread… however depending on the answer it may go in a different direction.

First lets make sure you have your Stealth set-up properly for the best performance. While wearing the orientation of the logo should have the top of the letters facing towards you when looking down… same as your regular under wear logo would be.

This requires that the base band is folded twice so that the leading inside edge of the band is lined up with or slightly overlapping the exposed seam where the single layer of material transitions into the double layer of the sheath section.

Its counter intuitive to have the seam exposed so guys often think that it is not supposed to be facing outside. If you do have it set-up this way the silicone ring will be facing towards the outside and it will not able to secure the penis into extension properly. This is due to the tendency of the silicone ring to roll under and allow retraction and /or slippage to occur

Check it out and see, let me know and we take it from there.

[Stealth Man]

Corey,

First lets make sure that you have your Stealth set-up properly for the best performance. While wearing the orientation of the logo should have the top of the letters facing towards you when looking down… same as your regular under wear logo would be.

This requires that the base band is folded twice so that the leading outside edge of the band is lined up with or slightly overlapping the exposed seam where the single layer of material transitions into the double layer of the sheath section.

Its counter intuitive to have the seam exposed so guys often think that it is not supposed to be facing outside. If you have it set-up this way the silicone ring will be turned to the outside and will not able to secure the penis into extension properly. This is due to the tendency of the silicone ring to roll under and allow retraction and/or slippage to occur

Check and see, let me know and we take it from there.

[Stealth Man]

Thanks for the detailed and informative post JITB.

36 hours straight while wearing the Corkscrew… thats amazing!

We hear quite often from guys reporting new and exciting ways to use Stealth by actively exploring their own creative combinations.

I am curious do pump at all or rely more on jelqing initiate engorgement?

 

 

[Author]

Posts