Fitting and Trust

hello @Sparkplug… good to hear about your initial experience with the Innerwear.

Putting on the Innerwear easily would indicate that the size is correct, however, the engorged glans also indicates a tight fit but not so much that you would want to make any size changes quite yet. If the fit was really too tight the engorged glans would be dark purple with some degree of discomfort which would demand immediate attention. I suggest giving it some more time for the break-in period in which the material will stretch out to fit over the first 7 – 10 days of daily use. The cooler glans is not a problem as the temperature of the glans fluctuates normally although more frequently under extension.

As your observation skills are sharp you can keep a close eye on things as they progress before coming to a conclusion on fit. Let me us how it goes as it will be helpful for others to hear about your experience with feedback on potential remedies and what-have-you’s as the fit stabilizes.

We do offer custom fittings when required, which typically involve tapered sleeves to a tighter fit behind the glans or a straight sleeve with smaller silicone ring when the shaft width to glans size is not so pronounced as well as substantial discounts on straight up resizes etc. Btw. you can send your request to the support email at [email protected] to receive a link to the demo videos for wearing the Innerwear, Sabre Skin and Corkscrew. We even have a video for setting up the Premium Sleeves with a few folds over top of a Retainer Band positioned behind the glans combined with the Ball Straps… which I have been wearing most recently to good effect.

Regarding your new Vac-Hanger… congrats!

I would not worry about the size selection as the fit of your innerwear is so close that it would not be of much consequence one way or the other. In fact, I wear the 24 girth (D series for length too) as well and rarely find myself using the 26 girth chamber with more focus on the 24 and 22 chamber sizes. The 26 is there if you need it but I feel users will tend to size down on additional chamber purchases when they want to expand their range of chamber options. Particularly for ADS extension training in the flaccid condition with low intensity all day stretching. For this purpose, I wear the 20m or even 18 girth chamber sizes. The larger size is always there for glans expansion purposes and future gains in size.

Thanks again for your posts!

Yes, the male anatomical proportions can vary widely between individuals in so many ways.

We have our standard 99 sizes which grew out of necessity over the past 12-13 years after starting out rather naively with a presumed 15 size selections being more than sufficient. And beyond that, for even more personalized fittings, we manufacture to meet the need for an array of custom sized configurations, nature of the beast… so to speak.

This involves for the most part tapered sleeves which are wider at the base that taper down for a tighter fit behind the glans at a mild angle or straight to mid-shaft before tapering steeper down to the glans.

We also have guys who require straight cut sleeves with a size or two smaller silicone ring when the shaft is thicker with a relatively less pronounced coronal ridge of the glans… to secure the flaccid in extension throughout the day without slipping back under the silicone ring when bending over or sitting.

In your case, we have the self described “Portobello” effect… which is something to be proud of in my estimation. Now this may require some adaptation with a smaller sized Sabre Skin over the shaft, your current 24 girth sound about right, combined with a larger Chamber size, Glans-Cap, and Vac-Seal.

One could even experiment with a double layering of Sabre Skin to bring the shaft diameter more into alignment with the chamber base to see if that would offer a suitable path of optimization in the pursuit of the ideal set-up.

For this purpose, a larger chamber set including the Glans-Cap and Vac-Seal seems to the direction to take at this point. Stealth offers, exclusively to kit owners, additional C-Sets of any size at $50 for the first set and $25 for additional sized sets after that.

However, in your case, as I had advised to go ahead and break the shrink wrap seal we can make your first C-Set selection at the same $25 with additional sizes for only $25 as well. All sizes include all three components… Chamber, Glans Cap and Vac-Seal.

Chamber sets will not be available for purchase to the general public at any price.

Take your time to consider and then let me know what you think.

Just received my Vac Hanger, prior to purchasing I ordered an innerwear and was sent a B28 going by the size I entered in the app. In the past a B28 was too small and was unable to wear it. I ended up removing the silicone band that’s molded into the end in order to put it on and had to go up to a 32 to be able to wear the product comfortably. I would use the B28 band to secure the 32.  A 26 band might be even better.  Any bending or squatting would cause the innerwear to fall off. I used the same measurement for the vac hanger and got sizes 26 to 30 in the kit. 26 is impossible, 28 is extremely difficult to get setup. Not sure it’s even sealing . To get the cap on requires lots of twisting , it does not slip on as shown in the videos. Will now try the 30.  There is absolutely no way I will use that tape that came with the kit. Tried following the double H tape procedure and found it very painful to remove. Now I will try using one of the innerwear sleeves from an innerwear order rather than tape to protect the gland.  A very flexible cap might be even better.  I think being able to order a set of sizing rings prior to placing an order for low price might be beneficial. Also rather than the weight straps I would prefer that the belt system is part of the kit.