I concur…
– take your time before deciding that you need a tighter fit. – cut in small increments and test or risk cutting off too much, in which you will need a replacement tube.
I also agree that everyone’s anatomical structure and also their personal preferences are different, with some who like the cock-ring effect and others a looser more comfortable fit.
The measurement for ordering should be taken in the erect condition as this will be the largest size. However, the flaccid size will be the more important fit as the Mag-Volt will be worn most of the time at the flaccid end of the size spectrum.
I personally noted much more scrotal mass and flaccid hang in the morning, particularly in the first few days of use. For this reason, it is suggested to cut and test the fit out for at least a day before deciding to cut shorter.
There have been several reports of the silicone tube coming off of the nipple while wearing the device. Once you have determined the ideal fit you can use a small dab of two-part epoxy on the nipple before inserting into the tube for a permanent bond. If you use too much epoxy it will collect and drip as the tube slides over the nipple and need to be cleaned up. You can also use instant super glue however, it is a hard crystalline structure that is not ideal for use with the flexible silicone tube.
